DryTreat 40Sk sealer in NZ

Wholesaler, Distributor and Agent

 

Contact : Dino 021930066 or Victoria 021662386
E-mail: drytreat@lustre.co.nz 

DRY-TREAT 40SK™ SURFACE CONSOLIDATOR is an impregnating, invisible and breathable sealer that protects porous tile, natural stone, sandstone, limestone, Basalt, travertine, Hinuera brick, terracotta, paving and grout from damage caused by water and salts, plus helps to consolidate friable surfaces.

Become a Drytreat Stockist or an accredited Dry Treat applicator email us orcontact us

Treated indoor and outdoor surfaces become easier to clean, maintain and keep looking good for longer. DRY-TREAT 40SK™ provides lasting protection for engineering concrete, terracotta tile, cast stone, paving, sandstone, limestone, brick and grout.

Typical applications: DRY-TREAT 40SK™ is suitable for a wide variety of applications, including building facades, floors, walls, swimming pool surrounds, patios, garages, kitchen and public and private entertaining areas. 

Benefits: DRY-TREAT 40SK™ is non film-forming; able to consolidate loose and friable surfaces; able to work without changing the appearance of the surface - keeps the original look; suitable for indoor and outdoor use; able to greatly reduce water uptake and minimise moss growth, freeze thaw spalling and efflorescence; an excellent chloride ion salt screen - ideal for marine and pool areas; highly water vapour permeable - able to breathe so there is no build-up of subsurface moisture, allowing it to dry out; deeply penetrating - protecting against weathering and wearing; very alkali resistant - won't breakdown in contact with cement based materials, and able to seal hairline cracks up to 0.3 mm (0.012 in.) and does not flake or peel.

Warranty: Dry Treat offers a 15-YEAR PERFORMANCE WARRANTY when DRY-TREAT 40SK™ is applied by an accredited applicator following our written instructions. 

Application rate: Total application rate is approximately one litre per 0.5 to four sq. metres (five to 40 sq. feet per quart) depending on absorption.

Pack Size of: 1gallon (3.79Lt)  5 gallons (18.9L)

 Technical data and MSDS Sheets

Contact : Dino 021930066 or Victoria 021662386

E-mail: drytreat@lustre.co.nz

Become a Dry Treat Dealer email us or contact us